Find information about rosin products at Rosinfactory.com
Rosinfactory.com         (201)565-8888
Rosinfactory.com         (201)565-8888
  Welcome to www.rosinfactory.com, Your source for all rosin information and products.
 

 

Home
Uses of Rosin
Types of Rosin
Rosin Grades
Rosin Chemistry
Rosin Recipe
Rosin Products
Violin Rosin
Rosin Art
Scalding Rosin
Binders and Adhesives
Binders and Adhesives
Depilatory Waxes
Rosin Distributors
Rosin Experiments
Rosin Paper
Rosin Flux
Rosin Baked Potatoes
Liquid Flux Formulas
Rosin Retailers
Rosin Wholesalers
Rosin Powder
Rosin Bag
Rosin Salves
Rosin allergy
Alternative Names
Questions & Answers
...
...
...

Please select from the list below or the links on the right. 

Depilatory Waxes
(Hard wax, Brazilian wax, Stripless wax)

Introduction

Pine rosin is used in production of different sticky waxes. In this article I provide the most common recipes for making depilatory wax that is also known as hard wax, Brazilian wax or stripless wax.

All about Hard Wax (Depilatory Wax, Brazilian Wax)

Hard wax is a depilatory wax that does not require a strip of fabric or special paper for pulling. It is applied to the skin at warm/ hot temperature and can be pulled after a few seconds when it cools down but it is still flexible. Many women use hard wax to remove some facial hair at home. Most of depilatory waxing however is performed by professionals and skilled beauticians in spas and beauty salons.  Depending on the part of skin being waxed the process may be called lip waxing, eyebrow waxing, bikini waxing or whole body waxing that is very common among models, actors, dancers, swimmers and others. Making hard-wax is relatively easy and can be done at home or office as long as proper ventilation is available.

Hard-wax recipe

Hardwax is made by melting and mixing pine rosin and beeswax at their melting temperature using proper equipment and precautions.

Caution: Pine rosin and beeswax are combustible materials and they can catch fire when they come in contact with an open flame or a very hot surface. Use an electric stove (hot plate) as your heating source and control the heat so that the materials will not boil and will not smoke. Make sure you have proper ventilation. Do not leave the melting materials unattended even for a moment. Negligence can cause boiling, overflowing and fire.

Tools and equipment

  • Electric stove or hot-plate, 1000-Watt
  • One-gallon stainless steel pot with spout (for pouring)
  • weighing scale (Balance scale or digital scale are preferred.)
  • Long spoon for stirring.
  • Silicon mold or aluminum tray for cooling down the prepared wax.
  • Trivets and gloves.
  • Fire extinguisher for added safety.
  • Wa

Materials to make 500 grams of depilatory wax

  • 400 grams of Brazilian pine rosin
  • 100 grams of filtered bees wax
  • 10 grams of GMS*

* GMS is an additive that functions as a release agent. Additives should not exceed 4% of the total product. See the list of optional additives and their properties bellow.

Procedure/ Instructions:

  • Weigh the materials and have them ready.
  • Place the stainless steel pot on the electric stove and start the heat.
  • Add beeswax to the pot and wait until it melts and covers the bottom of the pot.
  • Add pine rosin (chunks or flakes).
  • Watch the melting process and stir from time to time as needed.
  • Add solid additives such as GMS and continue stirring until everything is fully melted and mixed.
  • Slow down and turn off the heat as needed in order to prevent or stop boiling and bubbling.
  • Let the mixture cool down partially and then add your liquid additives or essential oils while stirring. (If the product is too hot at this moment or if you do not stir the mixture, the essential oils will evaporate instead of being mixed with the wax).
  • Pour the molten wax in aluminum trays or silicon molds to cool down. Do not pour more than 1/2 inch high in each aluminum tray so that you can later break them in pieces for storage and melting.
  • Allow the wax to cool down and solidify in trays or silicon molds.
These are all the materials in the pot.

Unlike what is suggested in this recipe we added all materials to the pot before heating. We made sure that GMS and beeswax are touching the bottom of the pot so that they will melt before rosin. They will melt faster because they have a lower melting temperature.

Heating is started and materials are partly melted. We continue stirring the mix slowly so that it will not burn at the bottom and will not boil to create a lot of foam or bubbles.

Lower the heat or temporarily stop the heat if you see signs of boiling or smoking.

All materials are fully melted and mixed. We have stopped the heat and waiting for the surface bubbles to disappear.

The wax is ready at this time, but it is too hot to be tested.

Surface bubbles are almost gone. The wax is complete and we are ready to pour in aluminum trays or silicone molds.

If you want to test the wax on the skin, you must wait some more until the wax solidifies on the walls of the pan.

Hard wax additives:

You may enhance the properties of hard-wax by adding small quantities of additives. Here are some examples.

  • Adding Glycerol Monostearate (GMS) to the above formula prevents the wax from sticking to the skin and simplifies the process of removal. It also allows the wax separate from silicon mold or aluminum trays much easier. I recommend 10 grams of GMS in the above formula (that is about 2%). You may reduce this to 1% (5 grams in the above formula) and it will still have a good effect as release agent.
  • If you don't have access to GMS, you may substitute that with stearic acid, tallow, or olive oil instead. These materials are not as good as GMS, but adding at least one of them is better than not using them at all.
  • Essential oil (such as lavender oil) may be added at a rate of 0.1%. So you may add one gram (about 1 cc or 20 drops) of lavender oil for one kilogram of wax. At this ratio, the above recipe will need 10 drops of lavender oil. Add the oil and stir while the wax is cooled down, but is not solid yet.

Product Codes:

Materials used in hardwax recipe are all available online at ChemicalStore.com and can be shipped worldwide or may be picked up in New Jersey. Product codes are as follows:

For special applications and technical support about rosin products please call ChemicalStore.com at (973) 405-6248. 

Where to buy gum rosin or pine rosin?

Where to buy Rosin?

Our rosin products are available for sale at www.ChemicalStore.com. For large orders please call in advance and verify the availability, wholesale discounts and shipping options. If you cannot find any product in the online store of your choice, please use the search option of the store or call (973)405-6248 for further assistance.

  All orders will be shipped from our warehouses in United States (USA), Canada or United Kingdom. We ship worldwide to most countries including U.S., Canada, Australia, United Kingdom, New Zealand, Germany, France, Netherlands, and many other countries.

Products of MiniScience for wholesale and retail

Rosin Products

Honduran Rosin
Chinese Rosin Lumps
Chinese Rosin
Brazilian Rosin Flakes
Brazilian Rosin (Flaked)
Rosin Powder
Rosin Powder
Hydrogenated Rosin
Hydrogenised Rosin
 
Other Rosin Websites
Rosin-Depot.com
Rosin-Factory.com
Rosin-Products.com
Rosin-Shop.com
Rosin-Store.com
Rosin-Warehouse.com
RosinDepot.com
RosinFactory.com
RosinProducts.com
RosinStore.com
RosinWarehouse.com
Violin-Rosin.com
 

 

Copyright 2005 MiniScience Inc.